Formulated Hardeners

Hardener HSC 8210
(Aliphatic Polyamine)

 

Product Description 

HSC 8210 is liquid aliphatic polyamine curing agent, it is used in combination with standard unmodified liquid epoxy resins, offers a short pot life and cures at a rapid speed. 

Features

  • Good hardness, toughness
  • Chemical resistance

Applications

  • It is used for various applications like casting, potting and encapsulation with various HSCL products.
  • Various including electrical insulation with HSC 7560,
  • composites with HSC 7600 and HSC 7660,
  • crack filling with HSC 7450.

Hardener HSC 8221
(Aliphatic Polyamine)

 

Product Description 

HSC 8221 is low viscosity cycloaliphatic amine. The product used as room temperature curing agent for epoxy resins. 

Features

Epoxy coating systems cured with HSC 8221 present the following features,

  • High levels of mechanical stability
  • Good color and color stability
  • Non blushing and excellent gloss
  • Superior chemical resistance
     

Applications

  • It is used for various applications like composites, floor coating, adhesive with modified epoxy resins.

Hardener HSC 8230
(Medium Viscosity Reactive Polyamine)

 

Product Description 

HSC 8230 is medium viscosity reactive polyamide resin based on dimer fatty acid and polyamine. The product cures at room temperature and yields tough chemical resistant coating. It is used for various applications like primer, screed, grouting with HSCL products and as such with solid epoxy resins for high solid paint formulations. 

Features

  • Good hardness and toughness and chemical resistance, good compressive strength with HSC 7450.

Applications

  • It is used for various applications like composites, floor coating, adhesive with modified epoxy resins.

Hardener HSC 8231
(Medium Viscosity Reactive Polyamine)

 

Product Description 

HSC 8231 is low viscosity reactive polyamide resin based on dimer fatty acid and polyamine. The product cures at room temperature and yields tough chemical resistant coating It is used for various applications like primer, screed, grouting with HSCL products and as such with solid epoxy resins for high solid paint formulations.

Features

  • Good hardness and toughness and chemical resistance, good compressive strength with HSC 7450.

Applications

  • Various including primer, screed, injection grouting with HSC 7450.

Hardener HSC 8233
(Medium Viscosity Reactive Polyamine)

 

Product Description 

HSC 8233 is medium viscosity reactive polyamide resin based on dimer fatty acid and polyamine. The product cures at room temperature and yields tough chemical resistant coating It is used for various applications like primer, screed, grouting with HSCL products and as such with solid epoxy resins for high solid paint formulations (Please refer to application data sheets).

Features

  • Good hardness and toughness and chemical resistance,
  • good compressive strength with HSC 7450.

Applications

  • Various including primer, screed, injection grouting with HSC 7450.
  • foundation grouting and adhesive with HSC 7100.

Hardener HSC 8234
(High Viscosity Reactive Polyamide)

 

Product Description 

HSC 8234 is high viscosity reactive polyamide hardener. It can be used in combination with suitable epoxy resins to produce both top coats and primers as well as adhesives applications. It is compatible with many synthetic resins, varnishes, oils and other.

Features

  • Good hardness, toughness
  • Chemical resistance

Applications

  • Primer and top coats
  • Adhesives

Hardener HSC 8236
(Low viscous modified curing agent)

 

Product Description 

HSC 8236 is low viscous modified curing agent designed for solvent free primer system to give superior bonding & high compressive strength for concrete surfaces even for high humid or wet application areas. 

Features

HSC 8236 presents following features:

  • Low viscosity
  • Excellent adhesion to green concrete

Applications

  • It is used for primer application for concrete substrates, Epoxy aggregate, Epoxy mortar, Tank lining for metal and concrete substrates.

Hardener HSC 8238
(Low Viscosity Reactive Polyamide)

 

Product Description 

HSC 8238 is low viscosity reactive polyamide hardener based on dimer fatty acid and polyamine. The product cures at room temperature and yields tough chemical resistant coating.

Features

Epoxy coating systems cured with HSC 8238 present the following features

  • High levels of mechanical stability.
  • Good adhesion to marginally prepared surfaces.
  • Resistance to aqueous alkaline, acid and saline solutions
  • Good corrosion resistance

Applications

  • It is used for various applications like primer, screed, grouting with modified epoxy resins and as such with solid epoxy resins for high solid paint formulations.

Hardener HSC 8239
(Low Viscosity Reactive Polyamide)

Product Description 

HSC 8239 is low viscosity modified polyamide hardener designed for solvent free primer system to give superior bonding & high compressive strength for concrete surfaces even for high humid or wet application areas.

Features

HSC 8239 has Low viscosity and Excellent adhesion to green concrete.

Applications

It is used for primer application for concrete substrates, Epoxy aggregate, Epoxy mortar, Tank lining for metal and concrete substrates.

Hardener HSC 8240
(Low Viscosity Modified Polyamide)

 

Product Description 

HSC 8240 is low viscosity modified polyamide hardener designed for solvent free primer system to give superior bonding & high compressive strength for concrete.

Features

HSC 8240 has Low viscosity and Excellent adhesion to concrete.

Applications

Low viscosity epoxy primer for concrete.

Hardener HSC 8291
(Low Viscosity Modified Polyamide)

 

Product Description 

HSC 8291 is liquid cycloaliphatic amine adduct curing agent; it is used in combination with unmodified/modified liquid epoxy resins for self-levelling top coat applications. It offers medium pot life, good wetting ability and high gloss coatings.

Features

Low color and color stability, High gloss in coatings, Low viscosity and good wettability, Negligible amine blush

Applications

Suitable for formulating self-levelling top coats with various choice of resins.

Hardener HSC 8292
(Low Viscosity Modified Polyamide)

 

Product Description 

HSC 8292 is liquid cycloaliphatic amine adduct curing agent; it is used in combination with unmodified/modified liquid epoxy resins for self-levelling top coat applications. It offers medium pot life, good wetting ability and high gloss coatings.

Features

Low color and color stability, High gloss in coatings, Low viscosity and good wettability, Negligible amine blush
 

Applications

Suitable for formulating self-levelling top coats with various choice of resins.

Hardener HSC 8301
(Medium Curing Phenalkamines)

 

Product Description 

HSC 8301 is a light coloured, low viscosity phenalkamines form cashew nut shell liquid. It can able to cure modified and unmodified epoxy resin at room temperature as well as low temperatures up to 5°C. It is able to demonstrate good curing characteristic in presence of moisture and high humid conditions. 

Features

  • Good chemical resistance to acids and alkalis.
  • excellent adhesion & film forming ability on variety of substrates.
  • Moisture sensitive.

Applications

  • Primers
  • Paints
  • Marine & Industrial coatings

Hardener HSC 8330
(Amino Polyamide hardener)

 

Product Description 

HSC 8330 is amino polyamide hardener supplied at 70% solids content in xylene. It can be used in combination with suitable epoxy resins to produce both top coats and primers as well as adhesives applications. It is compatible with many synthetic resins, varnishes, oils and other.

Features

  • Good hardness, toughness
  • Chemical resistance

Applications

  • Primer and top coats
  • Adhesives.

Hardener HSC 8430
(Modified polyamide hardener)

 

Product Description 

HSC 8430 is medium viscosity reactive polyamide resin based on dimer fatty acid and polyamine. The product cures at room temperature and yields tough chemical resistant coating. It is used for various applications like primer, screed, grouting with HSCL products and as such with solid epoxy resins for high solid paint formulations (Please refer to application data sheets). 

Features

  • Good hardness
  • toughness
  • chemical resistance
  • good compressive strength

Applications

  • Various including primer, screed, injection grouting foundation grouting and adhesive.

Hardener HSC 8571

(modified anhydride)

 

Product Description 

HSC 8571 is modified anhydride hardener; it is used in combination with HSC 5510 which is liquid amine accelerator. The liquid hot curing system goes for castings along with HSC 7550/HSC 4500.

Features

  • The system exhibits superior electrical, mechanical and thermal endurance properties.

Applications

  • Indoor & Outdoor electrical insulators for medium/ high voltage like post insulators and bushings, Instrument transformers, Dry type distribution transformers, Switch gears.

Hardener HSC 8573
(Accelerated low viscosity anhydride)

 

Product Description 

HSC 8573 is pre accelerated low viscosity anhydride hardener. The liquid hot curing system goes for castings with HSC 7250/ HSC 7251/ HSC 7152. The system exhibits superior electrical, mechanical and thermal endurance properties.

Features

  • The system offers very low initial mix viscosity which provides excellent fibre wetting and eventually superior mechanical properties and electrical properties.
  • The system offers negligible shrinkage, intramolecular stresses and excellent hydrophobicity.

Applications

  • Filament winding, pultrusion of structure and industrial composites, electrical laminates.

Hardener HSC 8577
(Low Viscosity Anhydride)

 

Product Description 

HSC 8577 is low viscosity anhydride hardener. The liquid hot curing system goes for castings along with HSC 7600/ HSC 7252. HSC 7600/ HSC 7252 and HSC 8577 mix cures at elevated temperature. 

Features

  • The system offers low initial mix viscosity which provides excellent fibre wetting and eventually superior mechanical properties and electrical properties.
  • The system offers negligible shrinkage, intramolecular stresses and excellent hydrophobicity.

Applications

  • Filament winding
  • Pultrusion of structure and industrial composites like electrical laminates.
  • VPI of C-Cores

Hardener HSC 9211
(Low viscous curing agent)

 

Product Description 

HSC 9211 is liquid aliphatic polyamine adduct curing agent. It is used in combination with standard unmodified liquid epoxy resins, offers a short pot life and cures at a rapid speed. It is used for various applications like bonding, fuel resistance etc. with HSCL brand resins. 

Features

  • Its offer short pot life
  • It uses for various application like bonding, Fuel resistance etc.

 

Applications

Various including bonding with Resin HSC 7100, fuel resistance with Resin HSC 7110 and as accelerator with various polyamides and polyamidoamine.

Hardener HSC 9214
(Reactive polyaminoamide)

 

Product Description 

HSC 9214 is reactive polyaminoamide curing agent, it is used in combination with HSC 7110 modified liquid epoxy resins, offers a short pot life. HSC 7110/HSC 9214 is multipurpose RT curing high strength system. 

Features

No VOC are liberated during the course of reaction, superior mechanical, thermal and electrical strength.

Applications

  • Multipurpose system
  • High temperature stable system.

Hardener HSC 9221
(cycloaliphatic amine adduct)

 

Product Description 

HSC 9221 is liquid cycloaliphatic amine adduct curing agent; it is used in combination with unmodified/modified liquid epoxy resins for self-levelling top coat applications. It offers medium pot life, good wetting ability and high gloss coatings.

Features

  • Low color and color stability, High gloss in coatings, Low viscosity and good wettability.

Applications

  • Suitable for formulating self-levelling top coats with various choice of resins.

Hardener HSC 9222

(Medium viscous modified amine curing agent)

 

Product Description 

HSC 9222 is medium viscous modified amine curing agent. It is used in combination with unmodified/modified liquid epoxy resins for adhesives & lamination applications. It offers medium pot life, good wetting ability and high viscosity. 

Features

  • Medium viscosity transparent clear system,
  • Moderate setting time

 

Applications

  • Imitation jewellery
  • Glass like transparent coating

Hardener HSC 9224
(Low viscous modified amine curing agent)

Product Description 

HSC 9224 is low viscous modified amine curing agent. It is used in combination with unmodified/modified liquid epoxy resins for self-levelling top coat applications. It offers medium pot life, good wetting ability and high gloss coatings. 

Features

  • Low color and color stability
  • High gloss in coatings
  • Low viscosity and good wettability
  • Moderate setting time

Applications

  • Suitable for formulating self-levelling top coats with various choice of resins.

Hardener HSC 9225
(Low viscous modified amine curing agent)

 

Product Description 

HSC 9225 is low viscous modified amine curing agent. It is used in combination with unmodified/modified liquid epoxy resins for self-levelling top coat applications. It offers medium pot life, good wetting ability and high gloss coatings. 

Features

  • Low color and color stability
  • High gloss in coatings
  • Low viscosity and good wettability
  • Moderate setting time

 

Applications

Suitable for formulating self-levelling top coats with various choice of resins.

Hardener HSC 9226
(Low viscous modified amine curing agent)

 

Product Description 

HSC 9226 is low viscous modified amine curing agent for formulating solvent-free linings for metal or concrete containers for potable water and fat-free foodstuffs when used in combination with unmodified liquid epoxy resins.
Self-levelling flooring screeds and top-coats can be formulated when used in combination with modified liquid epoxy resins. 

Features

  • Low color and color stability
  • High gloss in coatings
  • Low viscosity and good wettability
  • Medium pot life with good curing characteristics

 

Applications

Suitable for formulating self-levelling screeds and top-coats with various choice of resins.

Hardener HSC 9227
(Low viscous modified amine curing agent)

 

Product Description 

HSC 9227 is low viscous modified amine curing agent for formulating solvent-free linings for metal or concrete containers for potable water and fat-free foodstuffs when used in combination with unmodified liquid epoxy resins.
Self-levelling flooring screeds and top-coats can be formulated when used in combination with modified liquid epoxy resins. 

Features

  • Low color and color stability
  • High gloss in coatings
  • Low viscosity and good wettability
  • Medium pot life with good curing characteristics

Applications

Suitable for formulating self-levelling screeds and top-coats with various choice of resins.

Hardener HSC 9228
(High viscous modified amine curing agent)

 

Product Description 

HSC 9228 is high viscous modified amine curing agent. It is used in combination with unmodified/modified liquid epoxy resins for Adhesive applications. It offers medium pot life, good wetting ability and high viscosity. 

Features

  • Low color and color stability
  • Medium pot life with good curing characteristics

 

Applications

Suitable for formulating adhesives with various choice of resins.

Hardener HSC 9310 (Low viscous modified amine curing agent)

 

Product Description 

HSC 9310 hardener can be used to formulate solvent free heavy-duty anti-corrosion coatings or flooring compounds. It can be used as accelerator to accelerate polyamidoamine or cycloaliphatic polyamine hardeners due to its high reactivity.

Features

  • Excellent resistance to inorganic acids and organic solvents
  • Good adhesion to concrete and sandblasted steel

Applications

Suitable for application in coatings/floorings which exhibits: Short pot life and rapid cure
Good mechanical properties

Hardener HSC 9320
(Very low viscous modified amine curing agent)

 

Product Description 

HSC 9320 hardener can be used to formulate solvent free compound for application in floor coatings, protective and decorative coatings and chemical resistant coatings.

Features

  • Low viscosity, colour stability
    • Good resistance to hydrochloric 20%, sulfuric acid 50%, xylene
  • Good flexibility and hardness

 

Applications

Suitable for application in protective coatings/floorings.