BondOne Clear & Speed is two component modified epoxy adhesive system
Applications:
Glass to glass bonding
Metal to metal bonding
Metal to non metal bonding
Electronic component bonding
Features – Benefits:
Rapid curing
Superior bond strength
SKUs | Packaging Units:
450 g | 900 g | 1.8 kg | 9 kg | 90 kg
Application Procedure:
Make sure that application surface | substrate is clean, dry and free from oil, dust, grease and other contaminants.
Mix resin and hardener in 100:100 ratio by weight (not more than 10gm at a time) on clean dry and even surface. Mix thoroughly till uniform homogeneous mixture is formed.
Apply immediately on surface to be bonded, apply contact pressure using suitable fixture.
Allow to dry for 24 hours to get full strength.
Optimum layer of 0.1 to 0.2 mm gives optimum strength.
Allow to dry for 24 hours to get the full strength.