Features – Benefits:

• Temperature resistance to 100 degree Celsius
• No shrinkage
• Low volatile loss

SKUs | Packaging Units:

875 g | 1.75 kg | 8.75 kg

Application Procedure:

• Make sure that application surface | substrate is clean, dry and free from oil, dust, grease and other contaminants.
• Mix resin and hardener in 100:75 ratio by weight on clean dry and even surface. Mix thoroughly till uniform homogeneous mixture is formed.
• Apply on surface to be bonded.
• Apply contact pressure using suitable fixture. Allow to dry for 24 hours to get full strength.
• Optimum layer of 0.1 to 0.2 mm gives optimum strength.