Features – Benefits:

• Superior bond strength
• Resistance to mild acids and alkalise
• Good chemical resistance

SKUs | Packaging Units:

450 g | 900 g | 1.8 kg | 9 kg | 90 kg

Application Area:

• Metal to metal and metal to glass bonding
• Plastic to plastic bonding
• Electronics, textile reed and handicrafts
• Automobiles | Construction | Engineering

Application Procedure:

• Make sure that application surface | substrate is clean, dry and free from oil, dust, grease and other contaminants.
• Mix resin and hardener in 100:80 ratio by weight on clean dry and even surface. Mix thoroughly till uniform homogeneous mixture is formed.
• Apply on surface to be bonded.
• Apply contact pressure using suitable fixture. Allow to dry for 24 hours to get full strength.
• Optimum layer of 0.1 to 0.2 mm gives optimum strength.