BondOne Allcast

Introduction:

  • BondOne Abrocast is un-modified epoxy resin for multipurpose application along with BondOne Abrocast hardener

 

Applications:

  • Abrasive bonding
  • Flap wheels bonding
  • Metal – metal or metal – non metal bonding

Features – Benefits:

  • Superb bond strength
  • Chemical resistance
  • Mechanical stability

SKUs | Packaging Units:

Resin – 30 kg

Hardener – 30 kg | 110 kg

Application Procedure:

  • Make sure that application surface | substrate is clean, dry and free from oil, dust, grease and other contaminants.
  • Mix resin and hardener in 100:75 ratio by weight on clean dry and even surface. Mix thoroughly till uniform homogeneous mixture is formed.
  • Apply on surface to be bonded.
  • Apply contact pressure using suitable fixture. Allow to dry for 24 hours to get full strength.
  • Optimum layer of 0.1 to 0.2 mm gives optimum strength.
Similar Products