BondOne Electrocast


  • BondOne Electrocast is a black | brown coloured, solvent less, filled epoxy system



  • Casting, potting and sealing of small and medium sized electrical components
  • Casting of switch gear components and insulators
  • Cable joint insulation
  • Topping of capacitors as sealants

Features – Benefits:

  • Thermal shock resistance
  • Reduced shrinkage
  • Low coefficient of thermal expansion
  • Increased thermal conductivity


SKUs | Packaging Units:

Resin – 4 kg | 20 kg

Hardener – 1 kg | 5 kg


Application Procedure:

  • Make sure casting surface is clean without contaminants.
  • Apply release agent to mould.
  • Mix resin: hardener in ratio 100:25 to get uniform mixture.
  • Pour mixture in casting mould.
  • Allow to set for 24 hrs.
  • Take out the casting from the mould and prepare the surface for final finishing.
Similar Products