Features – Benefits:

• Long pot life
• Clear transparent film
• Water & Chemical resistant

SKUs | Packaging Units:

2 kg

Application Procedure:

• Make sure that application surface | substrate is clean, dry and free from oil, dust, grease and other contaminants.
• Mix resin and hardener in 100:100 ratio by weight and mix thoroughly.
• Apply properly on the glass substrate to be bonded, give induction time of 2-5 min before application on substrate. Allow to dry for 8 – 9 hours to get proper finish.
• It will take longer to dry and will give poor finish at low temperature below 15°C, in that case warm resin and hardener prior to application upto 40°C.
• Full strength will be achieved in 24 hours.