Features – Benefits:

• UV durable
• Chemical resistance
• Abrasion resistance

SKUs | Packaging Units:

Resin –  1 litre | 4 litre | 30 litre

Hardener – 250 ml | 1 litre

Application Procedure:

• Thoroughly clean the surface, it should be clean, dry, dust and grease free
• Check for cracks and hollow patches in surface, fill them with motor made with BondOne Silcrete. Use same mortar to fill wall to floor joints (fillets)
• Thoroughly mix resin and hardener in ration 100:50 and apply first waterproofing coat with the help of brush or roller
• After 3 – 4 hours apply second coat of epoxy in similar manner as step 3
• Apply epoxy compatible, UV resistant BondOne Topcrete to protect waterproofing layer from sunlight after epoxy coat is dried (6-8 hours)
• Apply second coat after 24 hours, allow to cure for 48 hours to get best results